Table of Contents
Advertisement
Output: Click the drop down arrows after the formats, and select the output resolution in the pull-down
menus according to actual needs.
Format: The width, height and frequency can be set if select "Custom" in "PGM Format". Click
"Setting" to confirm.
Genlock: Enable or disable the genlock function by sliding the genlock switch. If select "ON", the output
resolution will be same with the resolution that selected. HDMI or BNC can be selected in "Input
Source" by sliding the switch.
Aux/Backups: Enable or disable the Aux/Backups function by sliding the Aux/Backups switch. If users
select "ON", with four AUX outputs enable to show four individual layers; enable the splitting in
horizontal with four AUX outputs, also show a whole image; and enable the splitting in horizontal with 2
AUX outputs, and show PIP.
Note
DE Setting
Click the "DE Setting", and pop-up window as follows:
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
Content on AUX is set only need once,all
operation modes are the same AUX
signal.
support@rgblink.com
|
www.rgblink.com
16 / 46
Advertisement
Table of Contents
