Baur PD-TaD 80 User Manual page 24

Product information
Figure
For the PD testing:
For the dissipation factor measurement:
24 / 74
Cable
Calibrator connection
cables
tan δ cable
tan δ cable
VSE cables with 2
connection clips
(2 pcs)
VSE cables with Ø 4 mm
connector and a
connection clip
(2 pcs)
Length Function
Used to connect the calibrator to the PD test
circuit
10 m Is used for data transmission for dissipation
factor measurements between the VLF HV
generator and the PD-TaD 80
3 m Are used to connect the PD-TaD 80 for the
dissipation factor measurement for detecting
leakage currents

Connection between far end of protective
ring and adjoining de-energised phase as
return line
1.5 m Are used to connect the PD-TaD 80 for the
dissipation factor measurement for detecting
leakage currents

Connection between PD-TaD 80 and near
end of protective ring

Connection between PD-TaD 80 and
adjoining de-energised phase as return
line at near end
PD-TaD 80
822-188-3