Table of Contents
Advertisement
For your safety
2.3.2
Guaranteeing immediate measures in an emergency
The system may be operated only if a second person with visual and audio contact to the
tester is present and is in the position to detect possible dangers and to act immediately and
properly.
With an external emergency stop device (optional), it is possible to mount the trigger for the
emergency stop outside the test system so that it may be reached quickly in an emergency.
12 / 74
DANGER
High electrical voltage
Danger to life or risk of injury due to electric shock.
Before commencing work, the operator must assess the risks for
the specific working conditions. Protective measures are based on
the risk assessment and must be followed at the workplace.
Connect the system as described in this user manual.
Pay particular attention to ensuring the test object and system are
earthed correctly.
Observe the warning and safety signs on the system. Always check
whether the warning signs are available and are legible.
Never put the safety devices out of operation. It is forbidden to
bypass the safety devices.
Cordon off all metal parts in the area of the test object terminals
(connection point and far end). Insulate and earth metal parts to
avoid dangerous charges.
After a measurement or test - after switching off the device or system -
the test object can still be live with dangerous voltage.
Before removing the safety precautions, discharge, earth and short
circuit all live parts.
DANGER
Arcing fault when establishing a connection
Danger of burn injuries and electro-ophthalmia due to arcing fault.
Use suitable personal protective equipment to protect against
arcing faults.
Cover the adjacent live parts with an insulating material.
Use only undamaged connection cables.
Secure the connection points and far end of the test object.
Use special locking devices to lock connection points.
PD-TaD 80
822-188-3
Advertisement
Table of Contents
