Avoiding Dangers, Taking Safety Measures - Baur PD-TaD 80 User Manual

For your safety
In addition, the operator must have:

PD-TaD 80 integrated in the cable test van: Knowledge of the technical equipment and
operation of the cable test van and the devices used
PD-TaD 80 as a standalone system: Knowledge of the technical equipment and
operation of the PD-TaD 80 and the respective VLF HV generator

Knowledge of the testing and measurement procedures

Knowledge of plant engineering (cable types, switchgear, etc.).
2.3

Avoiding dangers, taking safety measures

 When installing the test system and operating PD-TaD 80 observe the following rules
and guidelines:

Accident prevention and environment protection rules applicable for your country

Safety instructions and regulations of the country where PD-TaD 80 is being used
(according to the latest version)

EU/EFTA countries: EN 50191 Installation and operation of electric testing systems
Other countries: The standard for installation and operation of electric testing
systems applicable for your country

EU/EFTA countries: EN 50110 Operation of electric systems
Other countries: The standard for operating electric systems applicable for your
country

If necessary, other national and international standards and guidelines in accordance
with the latest applicable version

Local safety and accident prevention regulations

Operational insurance association regulations (if any)
Only operate the system if it is in a technically safe condition.
Safety, function and availability depend on the proper condition of the system. Upgrades,
modifications or alterations to the system are strictly prohibited.
 Operate the system only in a technical perfect condition.
 Only use the PD-TaD 80 for the intended VLF HV generators specified on the data
sheet.
Connecting the PD-TaD 80 to VLF HV generators with a higher output voltage can lead
to flashovers.
 In the event of damage and malfunction, immediately stop the system, mark it
accordingly and have the faults rectified by appropriately qualified and authorised
personnel.
 Comply with the inspection and maintenance conditions.
 Use only accessories and original spare parts recommended by BAUR. The use of spare
parts, accessories and special facilities that are not tested and approved by BAUR could
adversely affect the safety, function and features of the product.
Do not dismantle the HV coupling unit
The housing of the HV coupling unit is sealed and gas-tight and may not be opened.
 Do not dismantle the HV coupling unit.
 Do not screw any components onto the HV coupling unit. Opening the housing can
damage the device.
10 / 74
PD-TaD 80
822-188-3