Advertisement
HS5E Miniature Interlock Switches with Solenoid
Accessories
Description
Sliding Actuator
Handle unit for right-hand door
Door Handle Actuator
Handle unit for left-hand door
(See page 738)
Switch cover unit
Padlock Hasp
Mounting Plate (Note 1)
Mounting Plate
Manual Unlocking Key (metal)
Rear Unlocking Button Kit (Note 2)
Note 1: When mounting HS5E-KVA0L (rear unlocking button) using a mounting plate, provide mounting holes on the mounting plate as shown below and use Rear
Unlocking Button Kit (HS9Z-FL5 ).
Note 2: See the table at right for choosing rear unlocking button kit.
Dimensions
Mounting Plate (HS9Z-SP51)
40
21
22
Material: Anodized aluminum A6063
Weight: Approx. 180g
Rear Unlocking Button Kit (HS9Z-FL5 )
HS5E-L
Interlock Switch
(sold separately)
Link Rod (SUS)
Screw (Iron)
710
Part No.
HS9Z-SH5
HS9Z-DH5RH
HS9Z-DH5LH
HS9Z-DH5C
HS9Z-A5P
HS9Z-PH5
HS9Z-SP51
HS9Z-T3
HS9Z-FL53
HS9Z-FL54
HS9Z-FL55
Manual Unlocking Key (metal)
(HS9Z-T3)
Drilling Rear Unlocking
Button Hole
40
21
Manual Unlocking Key (plastic)
4-M4 Screws
When installing the HS5E- 44L -G
(rear unlocking button), provide a rear
unlocking button hole on the HS9Z-SP51.
Button (PA66)
Hinge + Plate
(SUS)
Button pressed
21.3
(unlocked)
27.3
Button released
Pin (SUS)
Total thickness of mounting frame,
panel, and mounting plate: 23 to 53 mm
Example:
When mounting on 30mm-thick frame using HS9Z-SP51 mounting plate, the panel
thickness is 40 (10 + 30). Select HS9Z-FL54 rear unlocking button kit.
Remarks
See page 746 for details.
Choose according to the required opening side.
Used for installing the interlock switch inside.
When using the HS5E- 44L -G, provide a mounting hole for the
unlocking button as shown below in the mounting plate mounting
hole layout.
Used when the total thickness of mounting frame, panel, and
mounting plate ∗ is: 23 < X ≤ 33
(20 < X ≤ 30 when switch cover unit HS9Z-DH5C is used)
Used when the total thickness of mounting frame, panel, and
mounting plate ∗ is: 33 < X ≤ 43
(30 < X ≤ 40 when switch cover unit HS9Z-DH5C is used)
Used when the total thickness of mounting frame, panel, and
mounting plate ∗ is: 43 < X ≤ 53
(40 < X ≤ 50 when switch cover unit HS9Z-DH5C is used)
4
130
6.5
18
Rear Unlocking Button Kit
Mounting Hole Layout
2 or 4-M4 Screws
40
16
30
Note: With the mounting hole dimension,
the rear unlocking button rod does
not touch the hole even when the
interlock switch moves sideways.
16 to 30
Advertisement
