IDEC HS1C Series Manual

HS1C Series
HS1C
Key features include:
• Rugged Aluminum Die-cast Housing
B1
• With the actuator mounted on a movable door, and the switch on a
machine, the door can be mechanically locked when closed.
• Greater Safety: The door is unlocked by a solenoid lock-release signal
from a PLC or another source after the machine has stopped.
• In the event of power failure or for machine maintenance, the door can be
unlocked using a special tool.
• Flexible Installation: The actuator can be accessed from two directions.
• Select from four different circuit configurations.
• IP67 Protection
EN1088
EN60947-5-1
IEC60947-5-1
LED Indicator
Straight Key
(mainly for sliding
doors)
Adjustable Key
(mainly for hinged doors)
B1-38
HS1C Series Full Size Interlock Switch with Locking Solenoid
HS1C Series Functionality
Conduit Port: G1/2
Manual Unlocking Entry
(M4 opening)
L-shaped Key
The manual unlocking function:
(mainly for hinged
Accessible using a small screw-
doors)
driver after removing a TORX*
screw on the unlocking entry
www.idec.com
Safety Products
ET
Certificate No.
2005010305145652
GS-ET-15
BG standard in Germany
Tubular Clamp
Terminal Block (M3)
Terminal Block for the
Indicator (M3.5)
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
Direct Opening Action
Contact Mechanism
(Direct Opening Action)
Two Key Entry Slots
Ground Terminal
TORX* screw
Key wrench for TORX*
screws (included with
the switch)
*TORX is a registered trademark of Camcar Textron.