Interfaces; Electrical Connection; Bus Connection (Circular Plug M12, 5-Pole) - Burkert 8631 Operating Instructions Manual

D N
EVICE ET

Interfaces

Bus + supply

Electrical connection

The bus line is a 4-wire cable + screen which must comply with the DeviceNet specification. Over ist,
both the information (data) and energy are transmitted (voltage supply for low-power actuators and
sensors).

Bus connection (circular plug M12, 5-pole)

On the TOP Control on/off there is a 5-pole micro-style circular plug connector M12. The configuration
conforms to the DeviceNet specification.
Pin
1
2
3
4
5
CAN_H
white
Data
lines
CAN_L
blue
Drain (screen))
n.c.
Plug, looking at the pins from the front (not at the solder connections!)
28 - 8631
TOP
Control
on/off
DeviceNet
Signal Colour
Screen n.c.
V+ red
V- black
CAN_H white
CAN_L blue
4
5
1
Bus
V-
3
black
Voltage supply
11...24 V
max. Power consumption
5 W when all 3 valves are
switched
2
V+
red