2. Getting Started - Power Supply; Supplying Power With An Ac Adaptor - Panasonic DC-BGH1 Operating Instructions Manual

2. Getting Started
Power supply
You can supply power to the camera using an AC adaptor (supplied), a PoE+*
injector (commercially available), and a battery pack (optional)*
* PoE+ is an abbreviation of Power Over Ethernet Plus.
1
* This will be referred to as "battery pack" or "battery" onwards.
2
● When several power supplies are connected at the same time, it will be prioritized in the order of AC adaptor, PoE+
power supply and then battery.
● The battery that can be used with the camera is AG-VBR59/AG-VBR89/AG-VBR118. (As of October 2020)

Supplying power with an AC adaptor

Connect the supplied AC adaptor and AC mains lead to the camera to supply power (power supply).
AC adaptor (supplied)
A
AC mains lead (supplied)
B
1
Connect the AC adaptor to the [DC IN 12 V] terminal of the camera.
2
Connect the AC mains lead to the AC adaptor, then plug it into the power outlet.
●
The AC mains lead is for this camera only, so do not use it with other devices. Additionally, do not use the AC mains
lead of other devices with this camera.

2. Getting Started - Power supply

.
2
- 21 - - 21 -
compatible switching hub or PoE+ compatible
1
A
B