[V-Logl View Assist] - Panasonic DC-BGH1 Operating Instructions Manual

When [Photo Style] is set to [V-Log L]
Reflectance ratio (%)
IRE(%)
Stop
10 bit code value
12 bit code value
● When luminance is to be displayed by Stop units, this camera calculates IRE 42% to 0 Stop.
● Luminance can be checked by Stop units:
[ ] [ ] [Luminance Spot Meter] (
[ ] [ ] [Zebra Pattern] (

[V-LogL View Assist]

When [Photo Style] is set to [V-Log L], images output via HDMI/SDI will darken. Using [V-LogL View Assist] means you can
output images with LUT data applied via HDMI/SDI.
[MENU/SET] [ ] [
[Read LUT File]
[LUT Select]
[LUT View Assist (HDMI)]
[LUT View Assist (SDI)]
● When applying the LUT data, [LUT] is displayed on the recording screen.
● Up to 4 LUT data files can be registered.
■
Reading LUT Files
● The following LUT data can be used:
– The ".vlt" format, which meets the requirements specified in the "VARICAM 3DLUT REFERENCE MANUAL Rev.1.0"
– File names consisting of up to 8 alphanumeric characters (excluding extension)
● Save the LUT data with a file extension of ".vlt" in the root directory of the card (the folder opened when the card is
opened on a PC).
Insert a card on which LUT data is saved into the camera.
Select [Read LUT File].
● [MENU/SET] [ ]
Press to select the LUT data to read and then press [MENU/SET].
Press to select the location to register the data, and then press [MENU/SET].
● When registered items are selected, they will be overwritten.
6. Special Video Recording - Log Recording
109
110 / [Zebra Pattern])
] Select [V-LogL View Assist]
Reads LUT data from the card.
Selects the LUT data to be applied from among the preset ([Vlog_709]) and registered
LUT data.
Applies LUT data to images output over HDMI.
Applies LUT data to images output over SDI.
[ ] [V-LogL View Assist]
0
7.3
―
128
512
/ [Luminance Spot Meter])
[Read LUT File]
- 121 - - 121 -
18
42
0.0
433
1732
[Card Slot 1] / [Card Slot 2]
90
61
2.3
602
2408