Connecting To A Smartphone (Wired Lan Connection) - Panasonic DC-BGH1 Operating Instructions Manual

Connecting to a Smartphone (Wired LAN connection)

Connect the camera to the smartphone by connecting it to a wireless access point to which the smartphone is connected with a
LAN cable.
Preparation:
● Connect a smartphone to a wireless access point.
1
Set the camera to a DHCP client.
●
[MENU/SET] [ ]
● If you changed the setting of [IP Address Setting (LAN)], turn the camera off and then on again.
2
Set the camera to a wired LAN connection setting.
●
[MENU/SET] [ ]
Smartphone] [LAN]
3
Insert a LAN cable to the camera's [LAN] terminal and connect it to the wireless
access point.
4
On the smartphone, start up "LUMIX Sync".
5
(At the first connection)
Confirm the device name displayed on the screen of the output destination and then
select [Yes].
12. Remote Operations - Connecting to a Smartphone
[ ] [LAN / Wi-Fi] [LAN / Wi-Fi Setup]
[ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function]
[IP Address Setting (LAN)]
[New Connection]
- 223 - - 223 -
[DHCP Client]
[Control With