Panasonic DC-BGH1 Operating Instructions Manual page 4

Hide thumbs Also See for DC-BGH1:
Table of Contents

Advertisement

For the AC mains plug of three pins
Caution for AC Mains Lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC mains plug.
1.
Open the fuse cover with a screwdriver.
Figure A
Fuse cover
A
2.
Replace the fuse and close or attach the fuse cover.
Figure A
B
Fuse (5 ampere)
B
Information for Your Safety
or the BSI mark
on the body of the fuse.
Figure B
A
Figure B
B B
- 4 -
- 4 -

Advertisement

Table of Contents
loading

Table of Contents