Display Settings; Information Display (Hdmi/Sdi) - Panasonic DC-BGH1 Operating Instructions Manual

Display Settings

The recording information or menu screen will only be output to either the HDMI output destination or SDI output destination.

Information Display (HDMI/SDI)

You can set the output destination of recording information or menu screen. The default setting is set to [AUTO].
[MENU/SET] [ ] [ ]
[AUTO]
[HDMI]
[SDI]
[OFF]
● For external devices not set in the output destination of the information, the whole screen or part of the screen will be
displayed in black depending on the setting screen.
● By pressing [Fn1], you can switch the settings of [Info Display (HDMI/SDI)] in the order of [AUTO], [HDMI], [SDI], and
[OFF].
– [Info Display (HDMI/SDI)] is assigned to the [Fn1] at default setting.
– About Fn buttons (
● When the menu screen is not output to the external monitor, you can reset the [Info Display (HDMI/SDI)] settings to
[AUTO] by pressing [MENU/SET], [Q.MENU], and [Fn3] at the same time.
3. Basic Operations - Display Settings
Select [Info Display (HDMI/SDI)]
Only displays to the external device connected via HDMI. When it is not connected via
HDMI, it will be displayed on the external device connected via SDI. (when [SDI Output] is
[ON]).
Only displays to the external device connected via HDMI.
Only displays to the external device connected via SDI. (when [SDI Output] is [ON]).
Neither will be displayed.
154 / Fn Buttons)
- 39 - - 39 -