Panasonic DC-BGH1 Operating Instructions Manual page 20

■
Right side
19 40
40 Fan outlet
● The fan outlet for the cooling fan. Do not block it when using this camera.
41 REMOTE terminal cover
● Keep the REMOTE terminal cover out of reach of children to prevent swallowing.
42 [REMOTE] terminal (
● You can control a part of the function remotely by connecting the remote control unit (commercially available) to the
camera. (A Panasonic shutter remote control (DMW-RS2) cannot be used.)
43 Card door release lever
44 Card door
45 Card slot 1 ( 30 / Inserting Cards
46 Card access light 1
47 Card slot 2 ( 30 / Inserting Cards
48 Card access light 2
49 DC IN terminal cover
● Keep the DC IN terminal cover out of reach of children to prevent swallowing.
50 [DC IN 12 V] terminal (
51 Cable lock band attachment part (
52 Fan Inlet
● The fan inlet for the cooling fan. Do not block it when using this camera.
● The terminal cover is attached to the camera upon purchase. You can remove the terminal cover from the camera.
● When connecting a BNC cable to the [GENLOCK IN] terminal or [TC IN/OUT] terminal, use one that is less than 2.8 m
(9.1 feet).
It is recommended to use a double shielded BNC cable equivalent to 5C-FB.
1. Introduction - Names of Parts
41
43
44
49
145 / Using a remote control
(Optional))
(Optional))
21 / Supplying power with an AC
28 / Attaching the Cable Lock
■
Left side
42
45
46
47
48
50
51
unit)
adaptor)
Band)
- 20 - - 20 -
19
52