Panasonic DC-BGH1 Operating Instructions Manual page 52

Screen Displays While Video Recording
The video recording time
D
● The recording state indication
10 10
S S
● When the remaining capacity of the battery or card gets low during video recording, the tally lamps blink at long intervals.
When there is no remaining capacity in the battery or card, video recording is stopped and the tally lamps blink at short
intervals.
● If an operation such as a zoom or button operation is performed during video recording, that operation sound may be
recorded.
● The lens operation sound (AF and image stabilizer) may be recorded to video.
● If the operation sound of pressing the video rec. button to end recording bothers you, try the following:
– Record by remotely operating the camera (
– Connect a remote control unit (commercially available) that is compatible with the camera to the [REMOTE] terminal
to record.
● Depending on the type of card, the card access indication may appear for a while after video recording. This is not a
malfunction.
● Depending on the external device, during playback, situations such as image or sound quality being poor, recording
information not being displayed correctly, or playback not being possible may occur.
If the camera temperature rises, [
●
● You can change the tally lamp that turns on. You can also change the settings so the tally lamps do not turn on:
[ ] [ ] [Tally Lamp] (
● You can display a red frame on the recording screen that indicates that video is being recorded:
[ ] [ ] [Red REC Frame Indicator] (
4. Recording Videos - Recording Videos
and elapsed recording time
and card access indication
F
24 24 59 59
m m s s
204
] may be displayed and recording may stop. Wait until the camera cools down.
192 / [Tally Lamp])
191
E will be displayed.
turn red while videos are being recorded.
G
/ 12. Remote Operations)
/ [Red REC Frame Indicator])
- 52 - - 52 -