[Save/Restore Camera Setting]
[Save] / [Load] / [Delete] / [Keep Settings While Format]
Saves the camera's settings information to the card. Saved settings information can be loaded to the camera, letting you set
the same settings on multiple cameras. (
[Reset]
Returns the camera to its default settings. (
[Setup] menu ([Others])
: Default settings
[Clock Set]
Sets the date and time. (
[Time Zone]
Sets the time zone. (
37
[System Frequency]
[59.94Hz (NTSC)] /
[50.00Hz (PAL)] / [24.00Hz (CINEMA)]
This changes the system frequency of videos that are recorded and played back. (
[Device Name]
This will set the camera name (32 characters or less). For information on how to enter characters (
Characters)
●
The set name will be displayed as the individual ID for SSID during Wi-Fi connection or Tethered recording.
●
When Tethered recording using several cameras, it is recommended to set an individual device name for each camera.
[Pixel Refresh]
This optimizes the image sensor and image processing.
●
The image sensor and image processing are optimized when the camera is purchased. Use this function when bright
spots that do not exist in the subject get recorded.
●
When performing pixel refresh, block the lens from light with a body cap etc.
●
Turn the camera off and on after the pixels are corrected.
11. Menu Guide - [Setup] menu
171
/
[Save/Restore Camera
50
/ [Reset])
35
/
Clock
Set)
/
Time
zone)
Setting])
55
- 197 -
- 197 -
/
[System
Frequency])
203
/
Entering