[Sound Rec Level Adj.]; [Sound Rec Level Limiter]; [Wind Noise Canceller]; [Lens Noise Cut] - Panasonic DC-BGH1 Operating Instructions Manual

[Sound Rec Level Adj.]

Manually adjust the sound recording level.
Select [Sound Rec Level Adj.].
● [MENU/SET] [
Press to adjust the sound recording level and then press [MENU/SET].
● You can adjust the sound recording level within the range from [MUTE], [–18dB] to [+12dB] in steps of 1 dB.
● Displayed dB values are approximate.
● When set to [MUTE], [ ] is displayed in the recording screen.

[Sound Rec Level Limiter]

The sound recording level is adjusted automatically to minimize sound distortion (crackling noise).
[MENU/SET] [ ] [ ]
Settings: [ON] / [OFF]

[Wind Noise Canceller]

This reduces the wind noise coming into the built-in microphone while maintaining sound quality.
[MENU/SET] [ ] [ ]
[HIGH]
[STANDARD]
[OFF]
● You may not see the full effect depending on the recording conditions.
● This function works only with the built-in microphone. When an external microphone is connected, [Wind Cut] is
displayed. ( 141 / Reduction of Wind

[Lens Noise Cut]

You can reduce the zoom sound produced during video recording when you are using interchangeable lens compatible with
power zoom.
[MENU/SET] [ ] [ ]
Settings: [ON] / [OFF]
● When this function is used, the sound quality may differ from that during normal operation.
5. Recording settings - Audio Settings
] [ ] [Sound Rec Level Adj.]
Select [Sound Rec Level Limiter]
Select [Wind Noise Canceller]
This effectively reduces the wind noise by reducing the low-pitched sound when a strong
wind is detected.
This reduces wind noise without loss of sound quality by filtering out only wind noise.
―
Noise)
Select [Lens Noise Cut]
- 106 - - 106 -