[Luminance Spot Meter]
Specify any spot on the subject to measure the luminance over a small area.
1
Set [Luminance Spot Meter].
●
[MENU/SET]
[ ]
2
Select the position where you want to measure the luminance.
●
Press
to select and then press [MENU/SET].
●
To return the position back to the center, press [Fn1].
■
Measurement Range
Measuring is possible in the range –7% to 109% (IRE).
●
When [Photo Style] is set to [V-Log L], this can be measured with Stop units. (Calculated as 0 Stop=42% (IRE))
5. Recording settings - Main Assist Functions
[
]
[Luminance Spot Meter]
[ON]
- 109 -
- 109 -