Panasonic DC-BGH1 Operating Instructions Manual page 222

Connection Methods Other Than the Default Settings
When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below:
Display the connection method setting screen for the camera.
● [MENU/SET] [ ]
Smartphone] [Wi-Fi]
Press [Fn1].
■
Connecting via network
1 Select [Via Network] and then press [MENU/SET].
● Connect the camera to a wireless access point. (
2 In the setting menu of the smartphone, turn the Wi-Fi function ON.
3 Connect the smartphone to the wireless access point that the camera is connected to.
4 On the smartphone, start up "LUMIX Sync".
■
Connecting directly
1 Select [Direct] and then press [MENU/SET].
● Select [WPS Connection] to connect the camera to a smartphone. (
2 On the smartphone, start up "LUMIX Sync".
Terminating the Wi-Fi Connection
To end the Wi-Fi connection between the camera and smartphone, follow the steps below.
1
Set the camera to recording mode.
2
Terminate the Wi-Fi connection.
●
[MENU/SET] [ ]
● You can also perform the same operation by pressing the Fn button assigned with [LAN / Wi-Fi]. (
Assigned with [LAN /
3
On the smartphone, close the "LUMIX Sync".
12. Remote Operations - Connecting to a Smartphone
[ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function]
[ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function]
Wi-Fi])
[New Connection]
231 / [Via Network])
234 / [Direct])
[Yes]
- 222 - - 222 -
[Control With
206 / Fn Button