Disassembling Your Gastroback Easy Juicer - Gastroback DESIGN EASY JUICER Instructions For Use Manual

WARNING: Never use fingers to
push food down the feed chute or to
clear the feed chute. Always use the
food pusher provided.
Step 5:
Juice will flow into the juice jug and the
separated pulp will accumulate in the
integrated pulp container.
Note:
When the integrated pulp container is full of pulp, it must be emptied before con-
tinuing to juice. (Refer to disassembling instructions). Reassemble machine to con-
tinue juicing.

DISASSEMBLING YOUR GASTROBACK EASY JUICER

Always turn the appli-
WARNING:
ance off and pull the plug when the
appliance is not in use or when disas-
sembling, moving or cleaning the appli-
ance. Never let water or other liquids
run into the motorblock. Never clean the
line cord or the motorblock in the dish-
washer, poor liquids over the appliance
or douse or dip it in water or other
liquids.
Step 1:
Push the 'ON/OFF' button on the Easy
Juicer to 'OFF' and then switch 'OFF' at
the power outlet and unplug. Important
Wait for the filter basket to stop spin-
ning before continuing to step 2 (Pic-
ture 1).
Step 2:
Pull the locking arm back over the
grooves on either side of the juicer cover
(Picture 2). Move the locking arm down.
Step 3:
Remove the integrated pulp container
(preferably with the juicer cover, stain-
1
2
Slowly push
down the food
pusher to get the
most profitable
amount of juice
39