Assembling Your Gastroback Easy Juicer - Gastroback DESIGN EASY JUICER Instructions For Use Manual

ASSEMBLING YOUR GASTROBACK EASY JUICER

Before first usage: Rinse all the units of
the appliance that come into contact
with food with water and clean them
with dishwashing detergent. Operate
according to the instructions ›Care and
cleaning‹.
WARNING: Handle the units with
care and do not use any force. Pay
attention to the sharp blades on the
stainless steel micro mesh filter and the
feed chute to avoid injury. Always com-
pletely assemble your juicer before you
plug the plug into the power point.
Step1:
Place the motor base on a flat, dry sur-
face such as a bench top. Ensure that
the motor base is switched 'OFF' at
the power outlet and the power cord is
unplugged.
Step 2:
Place the integrated pulp container on
top of the motor base. Locate the inte-
grated pulp container so that the spout
fits through the hole on the front of the
motor base (Picture 1).
Step 3:
Align the arrows on the stainless steel fil-
ter basket with the arrows on the motor
drive coupling and push down until it
clicks into place. Ensure the stainless
steel filter basket is fitted securely inside
the integrated pulp container and onto
the motor base (Picture 2).
36
1
2
3