Zephyr Trapeze CTP-E 48SX Installation Manual page 17

1. Blower On/Off
By pressing , the blower is switched On and Off.
2. Speed Selection
The 3 speed levels are selected by presing
level selected.
3. Delay Off
This is used for programmed shut down of blower and lights 15 minutes after the function is activated. Press
a dot flashes in the lower right hand side of display
in 15 minutes.
4. Lights On/Off/Dim
Switch lights On and Off by pressing key
5. Advance Display Functions
Filters Clean Reminder (Baffle):
After every 3 0 hours of use, the display will start flashing an
possible clogs.
The standard Baffle Filters are required to be cleaned frequently and as recommended in order to maintain blower
efficiency. If improperly maintained, residue from cooking will sift though filters and cause damage to hood blowers
and other sensitive components; and possibly clog duct w ork and create a fire hazard.
to decrease and to increase speed level. T
indicating the function is on. The hood will completely shut down
once. To dim lights, press
reminding you to clean the baffle filters from residue and
18
www.zephyronline.com
he display indicates
again.
once,