Advertisement
USE, CARE, AND INSTALLATION GUIDE
Read all Instructions before Installing and operating this appliance
MODELS: ZPY-E30 (B,W,S), ZPY-E36 (B,W,S) Pyramid
IMPORTANT SAFETY NOTICE
WARNING
Installation
The installation in this manual is intended for qualified installers, service technicians or persons
with similar qualified background. DO NOT attempt to install this appliance yourself. Injury could
result from installing the unit due to lack of appropriate electrical and technical background.
All electrical wiring must be properly installed, insulated and grounded. Overly accumulated
grease in old duct work should be cleaned out or duct work should be replaced if necessary to
avoid the possibility of a grease fire. Check all joints on duct work to insure proper connection
and all joints should be properly taped.
Operations
Read all instructions in this manual before operating the appliance. Save these instructions for
future reference.
Always leave safety grills and filters in place. Without these components, operating blowers
could catch on to hair, fingers and loose clothing.
NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers.
NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire.
The risk of self combustion is higher when the oil has been used several times.
Cleaning
The saturation of greasy residue in the blower and filters may cause increased inflammability.
Keep unit clean and free of grease and residue build-up at all times to prevent possible fires.
Filters must be cleaned periodically and free from accumulation of cooking residue (see clean-
ing instructions inside). Old and worn filters must be replaced immediately. Do not operated
blowers when filters are removed. Never disassemble parts to clean without proper instructions.
Disassembly is recommended to be performed by qualified personnel only. Call our service cen-
ter for removal instructions.
The manufacturer declines all responsibility in the event of failure to observe the instruc-
tions given here for installation, maintenance and suitable use of the product. The manufac-
turer further declines all responsibility for injury due to negligence and the warranty of the
unit automatically expires due to improper maintenance.
* Please check for latest specification revisions before any custom work or cutouts.
Advertisement
Table of Contents
Related Manuals for Zephyr ZPY-E30 (B,W,S)
Summary of Contents for Zephyr ZPY-E30 (B,W,S)
-
Page 1: Important Safety Notice
USE, CARE, AND INSTALLATION GUIDE Read all Instructions before Installing and operating this appliance MODELS: ZPY-E30 (B,W,S), ZPY-E36 (B,W,S) Pyramid IMPORTANT SAFETY NOTICE WARNING Installation The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. DO NOT attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate electrical and technical background. -
Page 2: Table Of Contents
CONTENTS INSTALLATION Mount heights & clearance Ducting Specifications Mounting the hood & electrical FEATURES & CONTROLS Controls & features MAINTENANCE Cleaning Lights replacement WARRANTY Coverage & exceptions... -
Page 3: Installation
INSTALLATION MOUNT HEIGHTS Minimum mount height between range top to hood bottom should be no less than 24". Maximum mount height should be no higher than 32". It is important to install the hood at the proper mounting height. Hoods mounted too low could result in heat damage and fire haz- 6-3/4"... - Page 4 INSTALLATION DUCTING WARNING FIRE HAZARD NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,attics or garages. All exhaust must be ducted to the outside. Use Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or DuctTape. Some Ducting Options: side wall cap side wall cap...
-
Page 5: Specifications
INSTALLATION SPECIFICATIONS 3" (6" on 36" models) 10-1/2" 5-1/2" 1/2" Elec. K.O. 2-5/8" 5" 1" 4" 9" 30"or 36" 19-3/4" 3/4" 6-3/4" 1/4" to 4" 4-1/8"... -
Page 6: Mounting The Hood & Electrical
INSTALLATION MOUNTING THE RANGEHOOD ELECTRICAL WARNING All Electrical work must by performed by qualified electrician or person with similar technical know how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances. - Page 7 INSTALLATION MOUNTING THE RANGEHOOD 1. This range hood is mounted under a kitchen cabinet unit. 2. Select preferred duct location on rear or top of unit. For ductless conversion, no ducting is required. 3. An optional spacer plate is provided to cover the gap between the back of the hood and the wall.
- Page 8 INSTALLATION MOUNTING THE RANGEHOOD 9. Fasten mounting screws into underside of mounting location, and reposition hood into place. 10. Hang hood onto mounting screws and hand tighten. 11. For ductless conversion, the interior cover plate must be unscrewed, repositioned and re-screwed into alternate position as shown.
-
Page 9: Ductless Conversion
INSTALLATION DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. Fumes and exhaust from cooking is drawn and filtered by a set of optional Carbon Filters. The air is then purified and re-circulated back within the home. -
Page 10: Controls & Features
CONTROLS & FEATURES CONTROLS & FEATURES Lights On/Off Speed Selection Lights On/Off Turn lights on or off by moving this switch. Speed Selection This switch controls the speed of the blower. The first position is low speed, the second is medium speed, and the third is high speed. -
Page 11: Maintenance
MAINTENANCE CLEANING Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent (e.g. comet powder scrub, EZ-Off oven cleaner), or steel wool/scoring pads which will scratch and damage surface. For heavier soil use liquid degreaser such as 'Formula 409' or 'Fantastic' brand cleaner. After cleaning, you may use non abrasive stainless steel polish/ cleaners such as 3M or ZEP, to polish and buff out the stainless luster and grain. -
Page 12: Lights Replacement
MAINTENANCE LIGHTS Replacing Light Bulbs CAUTION: Light bulb becomes extremely hot when turned on. DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns. Make sure all power is turned off and bulbs are not hot. Remove by turning bulb counter clockwise. -
Page 13: Warranty
Damaged because of improper connection with equipment of other manufacturers. Repaired or modified by anyone other than Zephyr's Authorized Agents. What is Not Covered: Consumable parts such as light bulbs, filters, and fuses. - Page 14 TO OBTAIN SERVICE UNDER WARRANTY or any Service Related Questions, please call: 1-888-880-8368 Have your product proof of purchase with date ready for warranty issues. Or write to: Zephyr Corporation Service and Warranty Department 395 Mendell Street San Francisco, CA 94124...