Quick-Start Guide; Software Installation - Texas Instruments ADC08L060EVM User Manual

Quick-Start Guide

2 Quick-Start Guide
This section guides the user through the EVM test procedure to obtain a valid data capture from the
ADC08L060EVM using the TSW1400EVM capture card. This should be the starting point for all
evaluations.
2.1

Software Installation

The proper software must be installed before beginning evaluation. See
required software. The
website.
Important: The software must be installed before connecting the ADC08L060EVM and TSW1400EVM to
the computer for the first time.
2.1.1 High-Speed Data Converter Pro GUI Installation
The High-Speed Data Converter Pro (HSDC Pro) is used to control the TSW1400EVM and analyze the
captured data. See the HSDC Pro user's guide (SLWU087) for more information.
1. Download HSDC Pro from the TI website. The
find the software on the TI website.
2. Extract the files from the zip file.
3. Run setup.exe and follow the installation prompts.
4
ADC08L060 Evaluation Module
References section of this document contains links to find the software on the TI
Copyright © 2017, Texas Instruments Incorporated
Section 1.2
References section of this document contains the link to
www.ti.com
for a list of the
SLAU712 – February 2017
Submit Documentation Feedback