Diagnostics Messages Of The Function Blocks; Figure 8-1 Structure Of The Status Parameter; Example: Structure Of The Status Parameter For The Event "Request Aborted Due To Complete Restart, Figure 8-2 Restart Or Reset - Siemens SIMATIC S7-400 CP 440 Installation And Parameter Assignment
Point-to-point connection
Table of Contents
Advertisement
8.3
Diagnostics Messages of the Function Blocks
Each function block has a STATUS parameter for error diagnostics. The STATUS message
numbers always have the same meaning, irrespective of which function block is used.
Numbering Scheme for Event Class/Event Number
The figure below illustrates the structure of the STATUS parameter.
Figure 8-1
Example
The figure below illustrates the contents of the STATUS parameter for the event "Request
aborted due to complete restart, restart or reset" (event class: 1EH, event number 0DH).
Figure 8-2
Point-to-point connection CP 440 Installation and Parameter Assignment
Manual, 09/2007, A5E00057742-03
www.gkbpx.com
Structure of the STATUS Parameter
Example: Structure of the STATUS Parameter for the Event "Request Aborted Due to
Complete Restart, Restart or Reset"
Diagnostics with the CP 440
8.3 Diagnostics Messages of the Function Blocks
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
117
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMATIC S7-400 CP 440 and is the answer not in the manual?