Communication
3.4 DPV1
Requirement for using the DPV1 functionality with DP slaves
For DPV1 slaves from other vendors, you will need a GSD file conforming to EN 50170,
revision 3 or later.
Extended functions of DPV1
• Use of any DPV1 slaves from external vendors (in addition to the existing DPV0 and S7
• Selective handling of DPV1-specific interrupt events by new interrupt blocks.
• Reading/writing SFBs that conform to standards to the data record (although this can only
• User-friendly SFB for reading diagnostics.
Interrupt blocks with DPV1 functionality
Table 3-13
OB
OB 40
OB 55
OB 56
OB 57
OB 82
Note
You can now also use organizational blocks OB40 and OB82 for DPV1 interrupts.
System blocks with DPV1 functionality
Table 3-14
SFB
SFB 52
SFB 53
SFB 54
SFB 75
3-34
slaves, of course).
be used for centralized modules).
Interrupt blocks with DPV1 functionality
Functionality
Process interrupt
Status interrupt
Update interrupt
Vendor-specific interrupt
Diagnostic interrupt
System function blocks with DPV1 functionality
Functionality
Read data record from DP slave/IO device or centralized module
Write data record to DP slave/IO device or centralized module
Read additional alarm information from a DP slave/IO device or a centralized
module in the relevant OB
Set any interrupts for intelligent slaves
CPU 31xC and CPU 31x, Technical Data
Manual, 01/2006 Edition, A5E00105475-06