Diagnostics Messages Of The Function Blocks P_Send, P_Rcv And P_Print - Siemens SIMATIC CP 340 User Manual

Diagnostics with the CP 340

8.2 Diagnostics Messages of the Function Blocks P_SEND, P_RCV and P_PRINT

8.2 Diagnostics Messages of the Function Blocks P_SEND, P_RCV and
P_PRINT
Introduction
Every function block has a STATUS parameter for error diagnostics. The STATUS message
numbers always have the same meaning, irrespective of which function block is used.
Numbering scheme for event class/event number
The figure below illustrates the structure of the STATUS parameter.
Figure 8-1
Example
The figure below illustrates the content of the STATUS parameter for the "Job aborted due to
warm restart, hot restart or reset" event (event class: 1EH, event number 0DH).
Figure 8-2
134
Structure of the STATUS parameter
Example: Structure of the STATUS parameter for the the "Job aborted due to warm
restart, hot restart or reset" event
PtP coupling and configuration of CP 340
Manual, 04/2011, A5E00369892-03