Table of Contents
Advertisement
Preface
Purpose of This Manual
This manual explains how to configure and operate a point-to-point connection.
Contents of the Manual
The manual describes the hardware and software of the CP 440 communication processor
and its integration in an S7–400 programmable controller. It is divided up into instruction-
based chapters and a reference section (appendices).
The following subjects are covered:
● The basics of point-to-point communication with the CP 440
● Commissioning the CP 440
● Mounting the CP 440
● Communication via the CP 440
● Troubleshooting
● Application examples
● Properties and technical specifications
Scope of the manual
This manual is valid for the "CP 440 with X27 RS 422/485 interface", order number:
"6ES7 440–1CS00–0YE0" as of version "01".
Note
The description of the CP 440 communication processor in this manual were correct at the
time of publication. We reserve the right to describe modifications to the functionality of the
modules in a separate Product Information.
Point-to-point connection CP 440 Installation and Parameter Assignment
Manual, 09/2007, A5E00057742-03
www.gkbpx.com
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
3
Advertisement
Table of Contents
