quadient IN-360 Series User Manual page 73

5. Press [OK] to start the connection to the Postal Server.
If the crediting process is successful, the system displays a successful message.
4
If crediting fails, the system displays a failure message and the amount that you may
actually add, depending on your postal account balance.
6. You can open the Credit Used / Credit Available screen to check your account balance
once the transaction is complete (see
66).
See also
• In supervisor mode, you can set the Mailing System to ask for a PIN code for crediting:
see How to Set/Cancel a Crediting PIN Code
68
In the case of a communication error, the amount previously entered
cannot be changed. Check connection settings (see
Settings on page 146).
How to Check the PSD (Meter) Credit
on page 132.
Connection
on page