How to Clean the Print Heads Automatically (as Supervisor)
To clean the print heads automatically:
1.
In supervisor mode (see
Press
The cleaning starts automatically.
Wiper Process
How to Implement Wiper Process
1.
In supervisor mode (see
10
Press
2.
Open the top cover and remove the headset (see
on page 172).
3.
Press [OK] twice to start the carriage motor.
4.
Check wiper and clean if necessary, then press [OK].
5.
Re-install the headset and check it is back in replacement position.
6.
Close the top cover and press [OK].
170
How to Log in as Supervisor
and select the path:
How to Log in as Supervisor
and select the path:
on page 122):
Maintenance
Cartridge
on page 122):
Maintenance
Cartridge
How to Change the Ink Cartridge
Cleaning process
Wiper Process
Need help?
Do you have a question about the IN-360 Series and is the answer not in the manual?