About This Guide; Who Should Use This Guide; How To Use This Guide - Enterasys S-Series Upgrade Installation Manual

This guide explains how to upgrade an Enterasys S‐Series
eight‐bay Power over Ethernet (PoE) subsystem. This guide also provides information on how to
contact Enterasys Networks for additional help.

Who Should Use This Guide

This guide is intended for the qualified electrician responsible for installing the S‐Series PoE
upgrade kit.

How to Use This Guide

Read through this guide completely before attempting to upgrade an S‐Series chassis with a PoE
subsystem.
To locate information about various subjects in this guide, refer to the following table.
For...
An overview of the PoE upgrade and installation and
operation precautions.
Instructions for installing the PoE upgrade kit.
Installing PoE power supplies.
Specifications, environmental requirements, and physical
properties of the PoE subsystems.
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch
ausgebildetes und qualifiziertes Personal vorgenommen werden.

About This Guide

®
S8, S4, or S3 chassis with a four‐bay or
Refer to...
Chapter 1,
Chapter 2,
Chapter 3,
Supplies
Appendix A,
Regulatory Compliance
Enterasys S-Series PoE Subsystem Upgrade Installation Guide xiii
Introduction
Installing the PoE Upgrade Kit
Installing the PoE Power
Specifications and