Installing The Emi Gasket On The S-Series Chassis - Enterasys S-Series Upgrade Installation Manual

2. Install the EMI gasket on the S‐Series chassis.
a. Remove the adhesive backing from the gasket.
b. Place the gasket carefully in the recessed area of the S‐Series chassis. See Figure
Ensure that the gasket does not bulge inside the opening on the S‐Series chassis.
Figure 2-3

Installing the EMI Gasket on the S-Series Chassis

Installing the PoE Subsystem and the Bus Bar
Enterasys S-Series PoE Subsystem Upgrade Installation Guide 2-5
2‐3.