About This Guide; Using This Guide - Enterasys Matrix E5 5H152-50 Installation Manual

Fast ethernet modules
Table of Contents

Advertisement

Welcome to the 5H152-50 and 5H153-50 Modules Installation Guide. This guide provides the
network requirements, installation, and troubleshooting information for the following:
Fast Ethernet modules, 5H152-50 and 5H153-50
Optional Port Interface (Gigabit) Modules, 5PIM-G02 and 5PIM-G06
Optional Gigabit Port Interface Modules, GPIM-01, GPIM-08, and GPIM-09
For information about how to use Local Management to configure and manage the 5H152-50 and
5H153-50 module, refer to the MATRIX E5 Series Modules Local Management User's Guide.
Depending on the firmware version used in the module, some features described in this document
may not be supported. Refer to the Release Notes shipped with the module to determine which
features are supported.

USING THIS GUIDE

Read through this guide to completely understand the module capabilities and how to install the
modules.
A general working knowledge of Ethernet and IEEE 802.3 type data communications networks
and their physical layer components is helpful when using this module.
\
NOTE: In this document, the 5H152-50 or 5H153-50 may be referred to as either the
"switch," or the "module." When information applies to a specific module, the module will
be referred to by its name.
Important Notice

About This Guide

xiii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Matrix e5 5h153-505h152-505h153-50

Table of Contents