Unpacking The Poe Upgrade Kit; Hardware Contents Of Poe Upgrade Kit - Enterasys S-Series Upgrade Installation Manual

Unpacking the PoE Upgrade Kit

Unpacking the PoE Upgrade Kit
To unpack the S‐Series PoE upgrade kit:
1. Open the box and remove the packing material protecting the contents of the kit.
Save the shipping box and packing materials in the event the upgrade kit must be reshipped.
2. Verify the contents of each carton and compare the contents shipped with those listed in
Table
3. Perform a visual inspection of the PoE subsystem and bus bar for any signs of physical
damage.
If there are any signs of damage, DO NOT install the PoE upgrade kit; instead, contact
Enterasys Networks. Refer to "Getting Help" on page xv for details.
Table 2-1 Hardware Contents of PoE Upgrade Kit
Item
PoE subsystem (S-POE-4BAY-PWR or S-POE-8BAY-PWR)
Bus bar (S3-POE-BUSBAR, S4-POE-BUSBAR, or S8-POE-BUSBAR)
ESD wrist strap
EMI gasket
Flat head screws
Nylon spacers, .375"
Nylon washers, .100" (included in S3-POE-4BAY-UGK only)
Hex nuts
Flat washers
Belleville washers
Socket head cap screws
2-2 Installing the PoE Upgrade Kit
2‐1.
Note: PoE power supplies (S-POE-PS), which you must order separately, are shipped separately.
Quantity
1
1
1
1
8
2
2
2
5 (one spare)
5 (one spare)
5 (one spare)