This guide provides a general overview of the 2-slot Enterasys Networks XP-2000 hardware and
software features and provides procedures for installing the XP-2000. For product information not
available in this guide, see the manuals listed in Related Documentation
What's New
The content of this manual includes the addition of new and extended capabilities for the following:
Powering On and Booting the Firmware
Starting the Command Line Interface
Loading System Image Firmware
Loading Boot PROM Firmware
Who should Read this Guide?
Read this guide if you are a network administrator responsible for installing and setting up the XP-
2000.
Note:
Only qualified personnel should perform the installation procedures in this guide.
How to Use this Guide
If You Want To...
Get an overview of the XP-2000 software and hardware
features
Install the XP-2000 hardware
Install and boot the software, and set up the XP-2000
Enterasys X-Pedition 2000 Getting Started Guide
About this Guide
on page 43
on page 44
on page 56
on page 59
Chapter 1, Features Overview
Chapter 2, Hardware Installation
Chapter 3, Firmware Installation and Setup
on page
xiv.
See...
xiii