Your system is now running the added driver for SCSI DDS tape drive. You
are ready to use the drive to load a tape into your system.
Testing Your Installation
Note that a write-protect tab on the cassette allows you to protect data from
being over-written. You will need to make sure that the tab is moved to the
\writable" position in order for it to serve as a back up medium.
A simple test to make certain that everything has been installed satisfactorily
is to load a tape in the drive, wait for the \busy" light to stop blinking, and
execute the
command:
ioscan
/etc/ioscan
The LED on the drive should
icker brie
y. If the command completes
successfully, a listing of your devices, including the tape hardware address,
name and status will be displayed, indicating that it is installed correctly. Note
5
that the command may fail with a busy error if the command is executed
before the tape has completed loading.
DRAFT
Configuring HP-UX for Printers and Drives 5-29
2/5/97 11:31