All VME cards require kernel drivers. The HP-UX kernel provides a set of
services in the leset
which allows the user-provided kernel drivers
VME-SERV
access to VME space. You can use SAM to ensure that the
driver is in
vme2
your HP-UX kernel.
Your vendor should have provided you with the necessary les and instructions
for linking the driver for your card into the HP-UX kernel. Documentation
HP-UX 9.01 VME Driver
for creating these drivers is contained in the
Development Guide (Part Number A2261 90022).
VME Performance
Table B-1. VME Performance at 50/100 Mhz
Transaction
Transfer Rate
(Mb/s)
Read
Write
B
DRAFT
VME and EISA Accessory Cards B-3
2/5/97 11:31