HP 9000 Series Owner's Manual page 184

C
To display the current setting for a particular system path, type the following
at the
BOOT_ADMIN>
path type
path
path type is one of the path types listed in Table C-1.
where
For example, to get the path to the primary boot device, type the following at
the
BOOT_ADMIN>
path primary
To set a system path to a new value, type the following at the
prompt:
path type path
path
path type is one of the path types listed in Table C-1 and path is the
where
speci cation of the path in Mnemonic Style Notation as described in Table C-2.
For example, to set the console path to:
RS-232 Port A,
a baud rate of 4800,
C-10 Using the Boot ROM
Table C-2. Mnemonic Style Notation
I/O Type
prompt:
4 5
Return
prompt:
4 5
Return
4 5
Return
Speci cation Format
scsi address.logical unit number
scsi.
server address.init timeout.io timeout
lan.
hil
baud rate.word length.parity option
rs232_a.
baud rate.word length.parity option
rs232_b.
graphics_1
graphics_2
eisa.eisa_slot.optional_info
server address
bpn.
BOOT_ADMIN>
DRAFT
2/5/97 11:31