Backing Up Your File Systems - HP 9000 Series Owner's Manual

Backing Up Your File Systems

Preparation:
The following procedure sets up a scheduled backup:
1. If your system is more than six months old, you have non-HP supported
software, or you have never done a backup before, see
Tasks or Installing and Updating HP-UX 9.0 before proceeding. Otherwise,
SAM will provide interactive guidance. To use SAM, do the following:
2. Log in as .
root
3. Type
/usr/bin/sam
4. Choose
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Backup and Recovery
5. Choose
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Backup Devices
or NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Automated Backups
a. If you opened
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Backup Devices
the device is connected and the tape is inserted.
If you have to connect a device during this process, choose
Note
NNNNNNNNNNNNNNNNNNNNNNN
Refresh
b. Choose the entry for the desired device.
c. Choose
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add an Automated Backup
DRAFT
2/5/97 11:31
.
from the opening menu.
(to determine what backup devices are connected)
.
, and no devices are shown, make sure
from the NNNNNNNNNNNNNNNNNNNNNNN
Options
from the
Backing Up, Restoring, and Updating Software 6-5
System Administration
menu.
NNNNNNNNNNNNNNNNNNNNNNN menu.
Actions
6