Mounting The New Cd Rom Drive; Removing And Inserting A Disc - HP 9000 Series Owner's Manual

Mounting the New CD ROM Drive

SAM will mount the disc for you when you install the drive. You can then
mount it and unmount it manually, using the
with a exible disk.
If you have not already had SAM do so, in order for your system to boot with
the new CD ROM mounted, you will need to edit your
the following line to the
/dev/dsk/c201d2s0 /cdrom cdfs ro 0 0 # CD ROM
If you have only made this change to your system, executing
mount the new disk automatically, and it will stay mounted until you reboot
your system. (Note that using the
/etc/checklist
After mounting a new disk on a directory, an
give you at least one le or directory entry. For example:
5
total 1024
drwxr-xr-x
See the next section for information on unmounting the disc before you remove
it.

Removing and Inserting a Disc

You must mount a CD ROM disc every time you insert it into the drive, and
you must unmount the disc before the system will allow you to eject it from
the drive.
Note
5-24 Configuring HP-UX for Printers and Drives
/etc/checklist
-a
.)
2 root root
The eject button on the CD ROM drive is disabled while the
device is mounted or in use.
and
mount umount
/etc/checklist
le:
all unmounted devices in
option mounts
listing of the directory should
ll
8192 Aug 31 15:24
commands, as
. Add
will
mount -a
lename
DRAFT
2/5/97 11:31