HP 9000 Series Owner's Manual page 121

6. Choose
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Recover Files or Directories
highlight NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select Recovery Scope
7. Choose the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Selected Files
Do either of the following:
Fill in the lename containing a list of les to restore. The lenames
should be full pathnames. This le is
to create a graph le. You can use the on-line index le created by
a previous backup, but it must be edited to containing only the full
pathnames of the les to be restored.
Or enter each le name in the \Included" and \Excluded" boxes and click
on NNNNNNNNNNN . If you make a mistake, highlight the entry with the error and use
Add
NNNNNNNNNNNNNNNNNNNN or NNNNNNNNNNNNNNNNNNNN
Modify Remove
required, if you choose this method.
You can use both the le and the included/excluded method
simultaneously to specify les to be restored.
When you have completed determining the selected les to be recovered,
click on NNNNNNNN .
OK
8. To do any of the following during the restore process, activate
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Set Additional Parameters
Overwrite new les.
Maintain original ownership.
Recover les using full path name, or
Place les in a non-root directory.
Turn on the appropriate checkbox(es).
To restore les relative to a particular directory, ll in the directory.
Activate the NNNNNNNN control button to set the additional parameters.
OK
9. Activate the
NNNNNNNN control button to start the restore process.
OK
If con rmation messages appear, read the message(s) and activate the
control button to proceed in each case. SAM displays a window containing
the output of the executed
DRAFT
2/5/97 11:31
from the
. Click on
checkbox (it should have an asterisk (*) in it.
not a graph le. This le is used
to correct the mistake. Only the \Included" box is
:
command.
frecover
Backing Up, Restoring, and Updating Software 6-9
NNNNNNNNNNNNNNNNNNNNNNN
menu and
Actions
NNNNNNNN or press .
OK
4 5
Return
6
NNNNNNNN
OK