Parking Lights; Headlights Off Timer; Main Beam Headlights; Headlight Regulation - Jeep Renegade Owner's Handbook Manual

Hide thumbs Also See for Renegade:
Table of Contents

Advertisement

PARKING LIGHTS

They light up with the starter device in
STOP position or with the key removed,
moving the light switch first to O
position and then to
The
warning light switches on in
the instrument panel.

HEADLIGHTS OFF TIMER

Function activation: with lights on,
bring the ignition device to STOP:
timing will start when the light switch is
turned to O.
To activate this function the headlights
must be deactivated within 2 minutes
after the ignition device has been set to
STOP.
Function deactivation: this function is
deactivated by switching on the
headlights, the side lights or bringing
the ignition device to MAR. If the
headlights are switched off before
ignition, they will go out normally.

MAIN BEAM HEADLIGHTS

To activate the fixed main beam
headlights push left lever A
fig 30 (vehicle travel direction). The light
switch must be turned to AUTO or
.
The unstable position is activated by
pulling the lever towards you.
With main beam headlights on, the
24
warning light on the instrument
panel will come on at the same time.
position.
30
The main beam headlights are
deactivated bringing the lever back to
the central stable position. Warning light
switches off in the instrument
panel.
Automatic main beam headlights
This function is enabled with the display
Menu or the Uconnect™ system, and
with the light switch turned to AUTO.
The first time the main beam headlights
are activated (pushing the left lever), the
function is activated (green warning
light
come on in the instrument
panel).
If the main beam headlights are actually
on, the blue warning light
come on in the instrument panel.
To deactivate the automatic function
rotate the light switch ring nut to
position
.
DIRECTION INDICATORS
Bring left lever A fig 30 to the (stable)
position:
upwards: activates the right direction
indicator;
downwards: activates the left
direction indicator.
"Lane Change" function
If you wish to signal a lane change,
J0A0063C
place the left lever in the unstable
position for less than half a second. The
direction indicator on the side selected
will flash five times and then switch off
automatically.

HEADLIGHT REGULATION

Headlight corrector
It only works with the starter device in
position MAR and the low beams on.
To regulate, turn the A ring fig 31,
located on the left side of the
instrument panel (left hand drive
version) or on the right side (right hand
drive).
will also

Advertisement

Table of Contents
loading

Table of Contents