Lanesense Intensity; Side Distance Warning Intensity; Brakes - Jeep Renegade Owner's Handbook Manual

LaneSense Intensity

(where provided)
With this function, you can select the
power to apply to the steering wheel to
get the car back into the lane using the
electrical driving system, in case of
LaneSense operation.
Side Distance Warning
(where provided)
With this function, you can select the
type of signalling for the Side Distance
Warning.
The available options are:
"Off": the system is deactivated;
"Only acoustic": the system warns
the driver that there is an obstacle via
acoustic signal only, using the car
speakers.
"Visual & acoustic": the system
warns the driver of an obstacle through
acoustic signal (using the car speakers)
and visual, on the instrument panel
screen.

Side Distance Warning Intensity

(where provided)
With this function, you can select the
acoustic system volume for the Side
Distance Warning.
Blind spot warning
(where provided)
With this function, you can select the
type of signalling ("Only acoustic" or
226
"Visual & acoustic") to indicate an
object in the outside rear view mirror
blind spot.
Rain sensor
(where provided)
With this function, you can select the
activate/deactivate automatic
windscreen wipers in case of rain.

Brakes

(where provided)
With this function, you can select the
following menus:
"Brake service" (where provided): lets
you activate the procedure to effect
brake system maintenance;
"Automatic parking brake" (where
provided): lets you activate/deactivate
the automatic insertion of the parking
brake.
NAVIGATION
(Uconnect 5" Radio Nav LIVE versions
only)
Programming a route
In the interest of safety and to reduce
distractions while you are driving, you
should always plan a route before you
start driving.
To plan a route, do the following:
tap the screen to open the Main
menu;
select "Navigate to" or "Drive to";
select "Address": you can change
the country or state setting by tapping
the flag before you select a city;
enter the town or city name, or the
postcode. Towns with similar names are
shown in the list while you type;
Tip: tap the arrow to the right of the list
to expand the list of suggested towns.
When the correct city or town appears
in the list, tap the name to select the
destination.
enter the street name. Streets with
similar names are shown in the list while
you type. When the correct street name
appears in the list, tap the name to
select the destination;
enter the house number, then tap
"Done";
the location is shown on the map.
Tap "Select" to continue or tap "Back"
to enter another address;
when the new route is shown, tap
"Done". For more information about the
route, tap "Details". To change your
route, for example, to travel via a
particular location or to select a new
destination, tap "Change route".
Instructions for reaching the destination
are given through voice messages and
visual instructions on the display.