Trip Computer; "Lights"; "Doors & Locks" - Jeep Renegade Owner's Handbook Manual

"Lights"

Select item "Lights" to make the
following adjustments: "Ambient
lighting", "Follow me", "Headlights while
opening", "Headlight sensor", "High
Beams Auto Dim", "Daytime Lights",
"Cornering lights".
"Doors & Locks"
Select item "Doors & Locks" to make
the following adjustments: "Autoclose",
"Auto unlock on exit", "Flash Lights
w/Lock", "Horn with Lock", "Horn
w/Remote Start", "Remote Unlock"
(versions without Passive Entry), "Door
Unlock" (versions with Passive Entry),
"Passive Entry".
Versions with reconfigurable
multifunction display
On versions equipped with
reconfigurable multifunction display only
the following items are available:
"Display" (only items "See phone" and
"See navigation" can be selected),
"Security" and "Safety & Assistance"
(only item "Buzzer volume" can be
selected). All other items will be shown
and managed on the Uconnect™
system display.
46

TRIP COMPUTER

The "Trip computer" is used to display
information on vehicle operation when
the ignition device is at MAR.
This function is characterised by two
separate memories, called "Trip A" and
"Trip B", where the vehicle's "complete
missions" (journeys) are recorded in a
reciprocally independent manner.
"Trip A" allows the following values to
be displayed: "Distance travelled A",
"Average consumption A", "Journey
time (driving time) A".
"Trip B" allows the following values to
be displayed: "Distance travelled B",
"Average consumption B", "Journey
time (driving time) B". The "Trip B"
function may be excluded.
Both memories can be reset: (reset -
start of a new journey).
To reset the values of "Trip A" and "Trip
B" press and hold the OK button on the
steering wheel controls.
NOTE "Range" and "Instantaneous fuel
consumption" parameters cannot be
reset.