Driving In Special Conditions - Jeep Renegade Owner's Handbook Manual

something blocking the camera view or
a fault. If an obstruction is signalled,
clean the area of the windscreen
indicated in fig 66 and check that the
message has disappeared. In this case
the system might be not completely
available.
When the conditions limiting the system
functions end, this will go back to a
normal and complete operation. Should
the fault persist, contact a Jeep
Dealership.

Driving in special conditions

In certain driving conditions, such as,
for example:
driving close to a bend (see fig 67 );
vehicles with small dimensions
and/or not aligned in the driving lane
(see fig 68 );
lane change by other vehicles (see
fig 69 );
vehicle driving in a transverse way
(see fig 70 );
system intervention might be
unexpected or delayed. The driver must
be very careful, keeping control of the
vehicle to drive in complete safety.
78
67
68
69
70
J0A0081C
Important
The system has not been designed
to prevent impacts and cannot detect
possible conditions leading to an
accident in advance. Failure to take into
account this warning may lead to
serious or fatal injuries.
The system may activate, assessing
the trajectory of the vehicle, for the
presence of reflecting metal objects
J0A0082C
different from other vehicles, such as
safety barriers, road signs, barriers
before parking areas, tollgates, level
crossings, gates, railways, objects near
road constructions sites or higher than
the vehicle (e.g. a flyover). In the same
way, the system may intervene inside
multi-storey car parks or galleries, or
due to a glare on the road surface.
These possible activations follow the
normal operating logic of the system
and must not be regarded as faults.
J0A0083C
J0A0336C