Bluetooth Source; Phone Mode - Jeep Renegade Owner's Handbook Manual

Bluetooth SOURCE

Pairing an audio device Bluetooth ®
Proceed as follows:
activate the Bluetooth ® function on
the device;
Press the MEDIA button on the front
panel;
if the "Media" source is active, press
the "Source" button;
select the Bluetooth ® Media
source;
press the "Add Device" button;
search for Uconnect™ on the
Bluetooth ® audio device (during the
pairing stage a screen is displayed
showing the progress of the operation);
when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair the
Bluetooth ® audio device as favourite
(the device will have priority over all
other devices that will be paired
subsequently). If "No" is selected, the
priority is determined according to the
order of pairing. The last device
connected will have the highest priority;
an audio device can also be paired
by pressing the PHONE button on
the front panel and by selecting
"Settings" or, from the "Settings" menu,
selecting "Phone/Bluetooth".
If the Bluetooth® pairing between
mobile phone and system is lost,
consult the mobile phone owner's
handbook.

PHONE MODE

Activation of phone mode: press the
PHONE button on the frontplate.
Use the buttons on the display to:
dial the phone number (using the
graphic keypad on the display);
display and call the contacts in the
mobile phone phonebook;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio devices
to make access and connection easier
and quicker;
transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
NOTE Cell phone audio is transmitted
via the car audio system: the system
automatically deactivates the audio
system when you use the Phone
function.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Pairing a mobile phone
Proceed as follows:
activate the Bluetooth ® function on
the cell phone;
press the PHONE on the
frontplate;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
select "Yes" to start the recording
process, then search for the
Uconnect™ device on the cell phone
(by selecting "No"instead you see the
main Phone screen);
when prompted by the mobile
phone, use its keypad to enter the PIN
code shown on the system display or
confirm on the mobile phone the PIN
displayed;
from the "Phone" screen you can
always pair a mobile phone by pressing
the "Settings" button: press the "Add
Device" button and proceed as
described above;
during the pairing stage a screen is
displayed showing the progress of the
operation;
when the pairing procedure is
completed successfully, a screen is
displayed: answer "Yes" to the question
to pair the mobile phone as favourite
(the mobile phone will have priority over
all other mobile phones to be paired
subsequently). If no other devices are
paired, the system will consider the first
associated device as favourite.
221