Interior Lights; Front Courtesy Lights - Jeep Renegade Owner's Handbook Manual

31
Position 0: one or two people in
the front seats;
Position 1: 4 people
Position 2: 4 people + load in
boot
Position 3: Driver + maximum load
allowed stowed in the boot
Check the headlight position every time
the load weight is changed.
INSTRUMENT PANEL AND
CONTROL BUTTON
GRAPHICS BRIGHTNESS
ADJUSTMENT
With side lights or headlights on, turn
ring nut B fig 31 upwards to increase
light brightness of the instrument panel
and of the control button graphics, or
turn the ring nut downwards to
decrease it.
The ring nut is located on the left side
(left hand drive versions) or on the right
side (right hand drive versions) of the
dashboard.
WARNING
19) The daytime running lights are an
alternative to the dipped headlights for
driving during the daytime in countries
where it is compulsory to have lights on
J0A0889C
during the day; where it is not compulsory,
the use of daytime running lights is
permitted.
20) Daytime running lights cannot replace
dipped beam headlights when driving at
night or through tunnels. The use of
daytime running lights is governed by the
highway code of the country in which you
are driving. Comply with legal
requirements.

INTERIOR LIGHTS

FRONT COURTESY
LIGHTS
Switch A fig 32 is used to switch on/off
the courtesy lights bulbs.
Switch positions:
central position: lights C and E
switch on/off when the doors are
opened/closed;
pressed to the left (position OFF):
lights C and E are always switched off;
pressed to the right (position
lights C and D are always switched on.
The lights switch on/off gradually.
Switch B fig 32 switches light C on/off.
Switch D fig 32 switches light E on/off.
):
25