Replacing Fuses; Fuse Extracting Pliers - Jeep Renegade Owner's Handbook Manual

144
WARNING
138) Before replacing the bulb, wait for the
exhaust ducts to cool down: DANGER OF
SCALDING!
146
139) Modifications or repairs to the electric
system that are not carried out properly or
do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
140) Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst causing glass fragments to be
projected outwards.
IMPORTANT
59) Halogen bulbs must be handled
holding the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb dry.
J0A0444C

REPLACING FUSES

INTRODUCTION
141) 142) 143) 144) 145)
60) 61)

Fuse extracting pliers

To replace a fuse, use the pliers hooked
to the engine compartment fuse box
cover (see fig 145 ).
145
Grab the pliers from the upper tabs, as
shown in fig 146, press them and
extract the pliers pulling upwards.
J0A0250C