Front Fog Lights; Side Directional Indicators On Outside Rear View Mirrors - Jeep Renegade Owner's Handbook Manual

Hide thumbs Also See for Renegade:
Table of Contents

Advertisement

turn the light bulb group fig 132 and
holder counter-clockwise (on the left
side) or clockwise (on the right side)
and remove it D = parking
lights/daytime running lights (D.R.L.), E
= directional indicators
132
replace the burnt bulb: to extract it,
press lightly on it (1 fig 133 ) and at the
same time turn it counter-clockwise (2);
133
insert the new bulb, pressing on it
fig 133 and turning clockwise, making
sure it is properly blocked;
then insert the light bulb groups and
holder back into their seat and turn it
counter-clockwise (right side) and
clockwise (left side), making sure they
are properly blocked;
re-connect the electrical
connections;
finally replace flap B fig 130,
screwing down the attachment screws
A completely.

Front fog lights

To replace the bulbs proceed as
follows:
J0A0263C
completely swerve the wheels;
using the screwdriver, unscrew
screws A fig 134 and remove flap B;
134
J0A0264C
with tab C fig 135 remove the
electrical connector D;
135
turn the light bulb and holder E
fig 135 counter-clockwise and replace
the bulb;
insert the new bulb and holder
group, making sure it is properly
blocked;
reconnect the electrical connection;
finally replace flap B fig 134,
screwing down the attachment screws
A completely.
Side direction indicators
Side directional indicators on
outside rear view mirrors
(where provided)
For light bulb replacement, please refer
to Jeep Assistance Network.
Rear upper light group
J0A0211C
This contains the parking lights, brake
lights and directional indicators.
J0A0301C
143

Advertisement

Table of Contents
loading

Table of Contents