Tool Kit Bag (Where There Is One); Important Information About The Jack - Jeep Renegade Owner's Handbook Manual

155
remove the spare tire jack's
attaching device;
remove the wheel block wedge;
remove the jack and the spanner to
dismount the spare tire bolt. Turn the
jack's screws to loosen the spanner
and separate it from the jack
mechanism;
remove the tire from the boot.

Tool kit bag (where there is one)

On the versions with a spare tire, inside
the boot (on the right side) there is a
tool kit latched to the boot's covering
carpet with its own attachments.
Inside the tool kit there are fig 156:
A: the jack;
B: the screwdriver;
C: the refuelling adaptor in case of
emergency;
D: the pin to centre to wheel (where
there is one, use it when mounting the
spare tire);
E: a special anti-theft bolt (where
present, use when mounting/
dismounting the tire bolt);
F: a wedge to block the wheel;
G: the towing ring;
H: the spanner for mounting/locking
the tire bolt and to work the jack;
I: the emergency allen key to
J0A0365C activate the sunroof (where there is
one).
C
B
D
F
H
156
Important information about the
jack
Please note that:
the whole jack weighs 2.8kg;
the jack requires no adjustment;
the jack cannot be repaired: if it
breaks, it must be replaced with
another original;
no tool, except the crank wheel, can
be attached to the jack.
Proceed as follows:
in case where you have to place the
car on an inclined roadway, if it is very
steep, or if the ground is unstable, lift
A
out the blocking wedge A and open it
like a book, as shown in the illustration
fig 157;
E
I
157
G
warn anyone present that the car is
going to be lifted up: they need to leave
the immediate vicinity and even more
important, warn them not to touch the
J0A0226C
J0A0157C
155