Changing Units - Units (Imperial, Us Or Metric) - Triumph Tiger XR Owner's Handbook Manual

Changing Units – UnitS
(Imperial, US or Metric)
Units has four selectable display modes.
Each display provides the following
information:
mpg (Imperial gallons)
The speedometer and odometer will
read in miles. The fuel consumption will
be measured in imperial gallons.
mpg US (US gallons)
The speedometer and odometer will
read in miles. The fuel consumption will
be measured in US gallons.
L/100 km (Metric)
The speedometer and odometer will
read in kilometres. The fuel consumption
will be measured in litres of fuel per 100
km.
km/L (Metric)
The speedometer and odometer will
read in kilometres. The fuel consumption
will be measured in kilometres per litre
of fuel.
All Models
To access the units display; with the
motorcycle stationary and in neutral,
turn the ignition to the ON position.
Press and release the SET button on
the left hand switch housing until SEtUP
is visible in the display screen.
General Information
Press and release the SCROLL button
until UnitS is visible then press the SET
button.
1
1. Display screen
Press and release the SCROLL button
until the desired display is visible. The
display will scroll
following order when pressing down on
the SCROLL button (it will scroll through
in the reverse order when pressing up
on the SCROLL button):
• mpg – Imperial gallons
• mpg US – US gallons
• L/100 km – Metric
• km/L – Metric.
Tyre Pressure Units – Models with
TPMS fitted
Press the SET button and do not touch
the SCROLL or SET buttons again until
PSI or bAr is displayed. Press and
release the SCROLL button until the
desired tyre pressure units are visible.
through in the
43